- Specifications
- The wood specification grip is SUS 304 polish finished with a diameter of 25 mm.
- Walnut-toned sheet is set into the center.
- Mounting
- When the original grip is wood, withdraw it carefully using a monkey wrench.
- Since the cross-section of the pipe of the parking brake is C-shaped, use a flat screwdriver to widen this pipe and then fit in the brake grip.
- 6,000 yen
- Features
- The high gloss of wood and stainless steel are excellent for adding a deluxe quality.
- Since the parking brake grip is touched by your hand relatively less than the gearshift knob, this is manufactured from stainless steel rather than aluminum, which tends to corrode easily.
- Note) Aluminum can be treated with alumilite to prevent corrosion, but it loses its gloss if a clear coat is not applied.
|
